Difference between revisions of "TN1"
Jump to navigation
Jump to search
(Created page with "= TN1: Configuring a SPA504g for use with IP-Phone-C = == RTP Packet Size == The IP-Phone-C SIP server only accepts the SDP attribute value a=ptime:20. Any other value will r...") |
|||
| Line 1: | Line 1: | ||
= TN1: Configuring a SPA504g for use with IP-Phone-C = |
= TN1: Configuring a SPA504g for use with IP-Phone-C = |
||
| + | |||
| + | == Subscriber Information == |
||
| + | EXT > Display Name = <Phone Number> |
||
| + | EXT > User Id = <Phone Number> |
||
| + | EXT > Password = <Password> |
||
| + | EXT > Use Auth Id = Yes |
||
| + | EXT > Auth Id = <User Id> |
||
== RTP Packet Size == |
== RTP Packet Size == |
||
| − | The IP-Phone-C SIP server only accepts |
+ | The IP-Phone-C SIP server only accepts a SDP attribute a=ptime with the value 20. Any other value will result in a "488 Not Acceptable Here" response, incorporating a "307 Session description parameter not understood" warning. The engineer who programmed this is a bad person. |
| − | The SPA504g emits |
+ | The SPA504g emits the correct value with the following configuration: |
SIP > RTP Packet Size = 0.02 |
SIP > RTP Packet Size = 0.02 |
||
Revision as of 08:24, 30 December 2018
TN1: Configuring a SPA504g for use with IP-Phone-C
Subscriber Information
EXT > Display Name = <Phone Number> EXT > User Id = <Phone Number> EXT > Password = <Password> EXT > Use Auth Id = Yes EXT > Auth Id = <User Id>
RTP Packet Size
The IP-Phone-C SIP server only accepts a SDP attribute a=ptime with the value 20. Any other value will result in a "488 Not Acceptable Here" response, incorporating a "307 Session description parameter not understood" warning. The engineer who programmed this is a bad person.
The SPA504g emits the correct value with the following configuration:
SIP > RTP Packet Size = 0.02