Difference between revisions of "TN1"

From Paddon.org
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
= Configuring a SPA504g for use with IP-Phone-C =
+
= Configuring a Cisco SPA504g for use with IP-Phone-C =
   
 
[https://asahi-net.jp/en/service/ipphone-c/ IP-Phone-C] is a VOIP service provided by [https://asahi-net.jp AsahiNet]. It is a rebranding of NTT's [https://ja.wikipedia.org/wiki/%E3%83%95%E3%83%AC%E3%83%83%E3%83%84#%E3%81%B2%E3%81%8B%E3%82%8A%E9%9B%BB%E8%A9%B1 Hikari] VOIP service, so these notes may be applicable to similar services from other resellers.
 
[https://asahi-net.jp/en/service/ipphone-c/ IP-Phone-C] is a VOIP service provided by [https://asahi-net.jp AsahiNet]. It is a rebranding of NTT's [https://ja.wikipedia.org/wiki/%E3%83%95%E3%83%AC%E3%83%83%E3%83%84#%E3%81%B2%E3%81%8B%E3%82%8A%E9%9B%BB%E8%A9%B1 Hikari] VOIP service, so these notes may be applicable to similar services from other resellers.
   
The information in this note should be applicable to other VOIP handsets as well, although their configuration details will vary.
+
This note describes how to configure a [https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/small-business-spa500-series-ip-phones/data_sheet_c78-548564.html SPA504g] VOIP handset with the IP-Phone-C service. This information should be applicable to other VOIP handsets, although their configuration details will vary.
   
 
== Subscriber Information ==
 
== Subscriber Information ==
Line 23: Line 23:
   
 
== RTP Packet Size ==
 
== RTP Packet Size ==
The IP-Phone-C SIP server only accepts a SDP attribute a=ptime with the value 20. Any other value will result in a "488 Not Acceptable Here" response, incorporating a "307 Session description parameter not understood" warning. This is an extremely difficult issue to debug without a priori, and the engineer involved should be ashamed of themselves for not providing a more meaningful error response.
+
The IP-Phone-C SIP server only accepts a SDP attribute a=ptime with the value 20. Any other value will result in a "488 Not Acceptable Here" response, incorporating a "307 Session description parameter not understood" warning. This is an extremely difficult issue to debug without a priori knowledge, and the engineer involved should be ashamed of themselves for not providing a more meaningful error response.
   
 
The SPA504g emits the correct value with the following configuration:
 
The SPA504g emits the correct value with the following configuration:

Latest revision as of 09:12, 25 October 2019

Configuring a Cisco SPA504g for use with IP-Phone-C

IP-Phone-C is a VOIP service provided by AsahiNet. It is a rebranding of NTT's Hikari VOIP service, so these notes may be applicable to similar services from other resellers.

This note describes how to configure a SPA504g VOIP handset with the IP-Phone-C service. This information should be applicable to other VOIP handsets, although their configuration details will vary.

Subscriber Information

Configure an extension on the handset as follows:

EXT > Display Name = <Your 050 Phone Number>
EXT > User Id = <Your 050 Phone Number>
EXT > Password = <Your Password>
EXT > Use Auth Id = Yes
EXT > Auth Id = <Your User Id>

Audio Configuration

The IP-Phone-C SIP server only supports the G711u codec. Other codecs, or too many proposed codecs, may trigger a "488 Not Acceptable Here" response. Therefore configuration with just G711u is recommended.

EXT > Preferred Codec = G711u
EXT > Use Pref Codec Only = Yes

NAT Configuration

If you are using NAT, enable keepalives:

EXT > NAT Keep Alive Enable = Yes

RTP Packet Size

The IP-Phone-C SIP server only accepts a SDP attribute a=ptime with the value 20. Any other value will result in a "488 Not Acceptable Here" response, incorporating a "307 Session description parameter not understood" warning. This is an extremely difficult issue to debug without a priori knowledge, and the engineer involved should be ashamed of themselves for not providing a more meaningful error response.

The SPA504g emits the correct value with the following configuration:

SIP > RTP Packet Size = 0.02